How to Jump Start a Car with a Lithium Battery: A Step-by-Step Guide
Jump starting a car with a lithium battery is a relatively simple process that can be done in a few easy steps. It is important to take the necessary safety precautions when jump starting a car, so please read through the instructions carefully before beginning.
Step 1: Prepare the Car
Before attempting to jump start the car, make sure that the car is in park and the parking brake is engaged. If the car has a manual transmission, make sure the car is in neutral.
Products
Voltage
Capacity
Application
11.1V Lithium battery pack
11.1V
10Ah-300Ah
Electric bicycle
12.8V Lithium battery pack
12.8V
10Ah-300Ah
Electricity / Equipment / Car start
22.2V Lithium battery pack
22.2V
50~300Ah
Lamp / Light / Insecticidal lamp / Solar light
25.6V Lithium battery pack
25.6V
100~400Ah
Car / Power Equipment / Touring car / Stored energy
Step 2: Connect the Cables
Connect the positive cable (red) to the positive terminal of the lithium battery. Connect the negative cable (black) to the negative terminal of the lithium battery.
Step 3: Connect the Other End of the Cables
Connect the other end of the positive cable (red) to the positive terminal of the car’s battery. Connect the other end of the negative cable (black) to an unpainted metal surface on the car, such as a bolt or bracket.
Step 4: Start the Car
Start the car with the lithium battery. If the car does not start, wait a few minutes and try again.
Step 5: Disconnect the Cables
Once the car has started, disconnect the cables in the reverse order that they were connected. First, disconnect the negative cable (black) from the unpainted metal surface on the car. Then, disconnect the positive cable (red) from the car’s battery. Finally, disconnect the negative cable (black) from the lithium battery.
Congratulations! You have successfully jump started your car with a lithium battery.
Step 3: Connect the Other End of the Cables
